|
|
|
trans -d [+-]n [-c [+-]n] [-k keysig] [inputfile ...] [ > outputfile]
The trans command is able to process those pitch-related representations listed below. All other inputs are simply echoed in the output. For descriptions of the various input representations refer to Section 2 (Representation Reference) of this reference manual.
**kerncore absolute pitch representation **pitchAmerican National Standards Institute pitch notation (e.g. "A#4") **solfgFrench solfège system (fixed `doh') **TonhGerman pitch system
Transpositions are transformations that shift all pitch-signifier values up or down by some amount. Transpositions are specified by defining a diatonic offset and a chromatic offset. The diatonic offset affects only the pitch-letter name used to spell a note. The chromatic offset affects only the number of semitones shifted from the original pitch height.
For typical transpositions, both diatonic and chromatic offsets will need to be specified. For example, in transposing up a minor third (e.g. from C to E-flat), the diatonic offset is `up two pitch-letter names,' and the chromatic offset is `up three semitones.' The appropriate command invocation would be:
trans -d +2 -c +3 input > output
The plus signs above are optional; in their absence,
trans
assumes an upward transposition.
Note that negative offsets can be mixed with positive offsets.
For example,
trans -d -1 -c +1
will transpose the pitch C to B double-sharp, and F flat to E sharp, etc.
(i.e. down one letter name, yet up one semitone).
Modal transpositions are invoked by simply omitting the chromatic offset information. (See EXAMPLES below.)
It is recommended that output files produced using the trans command should be given names with the distinguishing `.tr' extension.
Options are specified in the command line.
-c [+-]n transpose up(+) or down (-) n semitones -d [+-]n transpose up(+) or down (-) n diatonic letter names -h displays a help screen summarizing the command syntax -k keysig replace all input key signatures by keysig
Note that the -d "option" is manditory rather than optional.
By default, trans maintains any original input key signatures in the transposed output. The -k option allows the user to specify a replacement key signature. Either "pitch-class" (*k[...]) or "pitch-height" (*K[...]) key signatures can be specified. (See the key signature tandem interpretation -- Section 3.)
Transposition up a minor third differs from transposition up an augmented second:
trans -d +2 -c +3 milhaud
trans -d +1 -c +3 milhaud
Enharmonic transpositions can be accomplished by defining the chromatic offset as zero semitones. For example, the following command transposes up a diminished second. It might be used to transpose from the key of C-sharp to the key of D-flat.
trans -d +1 -c 0 moonlight
Transposition up or down an octave requires both a diatonic offset and a corresponding chromatic offset of plus or minus 12 semitones. e.g.
trans -d -7 -c -12 guitar
In addition to exact pitch transpositions, trans can also perform modal transpositions. Modal transpositions arise when the pitch letter names are modified without regard for the precise semitone offset. To invoke a modal transposition, simply omit the chromatic offset specification. The following transposition changes diatonic pitch-letter names (down by two pitch-letters) so that the pitch C will become A, etc.
trans -d -2 major > aeolian
For inputs in major keys, the corresponding outputs will be in Aeolian mode.
For some applications, two or more successive transpositions may be necessary. For example, the following pipeline modifies inputs in major keys so that they are in the tonic Dorian mode.
trans -d +1 major | trans -d -1 -c -2 > dorian
The first trans carries out a modal transposition -- up the interval of a diatonic second. Thus, a work in D major would be placed in E Dorian. The second trans returns the score down the precise interval of a major second. Together, both transpositions would cause an input in F major to be transformed to F Dorian; an input in B-flat major would be transformed to B-flat Dorian, etc.
Whenever trans is invoked, it adds a tandem interpretation to the output indicating that the output representation has been transposed and is no longer at the original pitch. Transposition tandem interpretations are similar in syntax to the trans command itself. For example, the following tandem interpretation indicates that the score has been transposed up a major second.
*Trd1c2
The tandem interpretation in effect echoes the operation of the original transposition. If a score has undergone more than one transposition, the associated tandem interpretations will be ordered beginning with the most recent transposition. For example, a work that was transposed down a perfect fourth, followed by up a diminished second:
trans -d -3 -c -5
trans -d +1 -c 0
would contain the tandem interpretation:
*Trd1c0
*Trd-3c-5
**kern **pitch **Tonh **solfg **foo *k[] * *K[] *k[b-] * =1 =1 =1 =1 . c C4 C4 do4 abc c# C#4 Cis4 do~d4 . d- Db4 Des4 re~b4 xyz r r r r . =2 =2 =2 =2 . B- Bb3 B3 si~b3 . B-- Bbb3 Heses3 si~bb3 . =3 =3 =3 =3 . *- *- *- *- *-
the command
trans -d 1 -c 2 -k '*k[f#c#]'
would produce the following output:
**kern **pitch **Tonh **solfg **foo *k[f#c#] * *k[f#c#] *k[f#c#] * *Trd1c2 *Trd1c2 *Trd1c2 *Trd1c2 * =1 =1 =1 =1 . d D4 D4 re4 abc d# D#4 Dis4 re~d4 . e- Eb4 Es4 mi~b4 xyz r r r r . =2 =2 =2 =2 . c C4 C4 do4 . c- Cb4 Ces4 do~b4 . =3 =3 =3 =3 . *- *- *- *- *-
**pitch, **kern, **Tonh, and **solfg representations
are intended to represent absolute or concert pitch;
transposed scores are considered deviations from this convention.
The
transpose tandem interpretation
should not be used to indicate that an encoding is for a
transposing instrument.
A special tandem interpretation -- beginning
*ITr
-- is reserved for such designations.
The interpretation
*Tr
means that the encoding no longer represents absolute or concert pitch.
By contrast, the interpretation
*ITr
means that the instrumentalist reads from a score whose pitches are
notated differently from concert pitch;
nevertheless, the ensuing data is encoded at concert pitch.
For example, a trumpet in B-flat plays a B-flat by fingering the pitch C.
The absolute pitch (B-flat) is the proper **kern, **pitch, **solfg,
or **Tonh encoding.
Since the instrumentalist's
notation
is transposed up 1 diatonic letter-name and 2 chromatic semitones from
the absolute or concert pitch, the encoded score will contain the instrument's
transposition tandem interpretation
*ITrd1c2
(even though the encoded data is at concert pitch). Note that it is possible subsequently to transpose such a score using the trans command.
Note that by default, key and key signature tandem interpretations are not modified by
trans
since the **pitch, **kern, **solfg, and **Tonh
representations are intended to encode the original key and key
signature at absolute pitch.